TempEye M120i Indoor Outdoor Thermometer, Digital Color Display, Stainless Steel

Description

Indoor Outdoor Thermometer
Model M120i
The TempEye° Model M120i is an easy-to-use, high-precision indoor/outdoor thermometer.  It has one internal temperature sensor, and an attachable probe sensor with a 7-foot cable and hardware for installation outside.
Key Benefits . . .
Precise accurate readings
Read up to 50 ft away
Place on countertop or wall
Easy set-and-forget design
Stainless steel enclosure
Ideal in . . .
Warehouses/Industrial areas
Recreational vehicles
Laboratories
Lobbies
Residential homes
Available in . . .
STAINLESS
or
BLACK
Angle & Distance for Superior Visibility
WIDE
Viewing Angle
At 130° the visibility is nearly side to side.
LONG
Viewing Distance
50ft (15m) will accommodate the length of even large rooms.
SUPERIOR
Coverage
These combined give you 84% coverage in a 50x50ft (15x15m) room.
M120i Thermometer Specifications
Display
Height 1.5in (38mm)
Four dual color LEDs...
~632nm λred
~570nm λgreen
Viewing Angle
130°
Viewing Distance
50ft (15m)
Settings
12 Settings for over 2,000 display combinations
Temperature Scales
°C °F °K
Internal Range
-20  <>    85  °C
-4  <>  185  °F
253  <>  358  °K
External Range
-40  <>  125  °C
-40  <>  257  °F
233  <>  398  °K
Precision
0.1° or 0°
Measurement Cycle
1 2 4 or 8 seconds
Power Consumption
35mA at 5V DC
Power Adapter
Input: 100-240VAC 0.4A 50/60Hz
Output: 5.0VDC at ~1000mA
Outer Case
High-strength 16-gauge stainless-steel (~1/16in, ~1.6mm)
Dimensions
7.25 x 5.25 x 1.375 in
185 x 133 x 35 mm
2.0lbs (0.915kg)
Manufactured
Made in USA
Set & Forget Design
The M120i is controlled by 12 setting switches on the back, with a label identifying each switch.  Quickly try out the different features to find those that best match your needs.  Adjust colors, precision, temperature scales, display rate, single/dual display, scale indicators, and the heartbeat.
DISCIPLINED
Engineering
Designed so it can be set up once and then forgotten.
LOW
Maintenance
No need to worry about replacing batteries, fixing settings after power glitches, or keeping manuals handy.
GREAT
Confidence
Peace of mind designed in.
Outdoor Temperature Probe Specifications
Temperature Range
-40  <>  125  °C
-40  <>  257  °F
233  <>  398  °K
Accuracy
+/-0.25 °C from -40 to 125 °C
Stability
< 0.01 °C/Year
Microprocessor
Silicon Labs Si7051
Interface
I²C
Connector
RJ9 with locking tab
Cable Length
7ft (2m)
Case
Corrosion resistant stainless steel
2.5in (64mm) tall
0.275in (7mm) diameter
Manufactured
Made in USA
Overrated & Underused
We carefully test and choose each component to last, to function properly, or to emit the correct light wavelength.  From the metal case, internal board, trace widths, component mean time to failure, range and tolerances, to cycle tests, every part was carefully tested and selected.  And yes it has a physical on/off switch too.  Each M120i Thermometer is made in our USA facilities.
OVERRATED
Capacity
If our current draw is 35mA, then a 5Amp rated switch would be excellent.
UNDERUSED
Cycles
Our switch demands a lifetime of 3,000 cycles, so a switch with a 30,000 cycle lifetime is ideal.
HEAVY DUTY
Result
A high-strength, high-performance, product that produces superior results for decades.
Explore Possibilities
Set the thermometer display the way you prefer from 2,000+ possible combinations . . .
1/10ths, Fahrenheit scale, green.
Rounded to the nearest degree.
Select red or green for each sensor.
Or display both sensors simultaneously.
Thermometer shown in Matte Black with Reversible Stand.
Bottom air vent for indoor temperature sensor.
Made and assembled in USA.
In The Box
12x10x8in (30x25x20cm)
M120 Thermometer
Base controller with internal temperature sensor, ambient light sensor, 1.5-in high LED display, and 12 option switches providing 2,000+ different configurations
Power Cable
USB type A to type A with a 3-foot (1-meter) length
Power Adapter
With 100V-240V AC 0.4A 50/60Hz input and 5.0V DC at ~1000mA output
External Temperature Probe
With a 7-foot (2-meter) cable, installation spring clip & hardware
Reversible Stand
Made of stainless steel and with two viewing angles (0° and 12°)
English Users Guide
With external temperature probe installation instructions
Sheet Music
Of the official TempEye° M120 Series jingle
3% of each
TempEye° thermometer sale
is donated to...
Western Lands Preservation
Cofounded and managed by
Steven Whitney
Send us a recording of you singing the TempEye° M120 Jingle and we will send you a purchase refund on the TempEye° thermometer you bought.  If we feature your recording on our website, we will send you an additional .  Have some fun and add some instruments.
Jingle offer may be cancelled at anytime, without notice.  Must be a customer.  Limited to one award per purchase.
Join our customers from Dallas to Denmark who
enjoy their TempEye° Thermometers.