OX-Gen 4500 1.59 CFM Pond and Water Garden Diaphragm Aeration Pump OX-4500

Description

Half Off Ponds OX-4500 - OX-Gen 1.59 CFM Diaphragm Aeration Pump for Ponds and Water Gardens
Half Off Ponds OX-4500 - OX-Gen 1.59 CFM Diaphragm Aeration Pump for Ponds and Water Gardens
Half Off Ponds OX-Gen OX-4500 1.59 CFM Air Pump
The OX-Gen 4500 Air Pump is the perfect aerator to maintain and keep a healthy koi pond and water feature.
OX-Gen Air Pumps are built to be reliable and efficient for everyday use. This aeration pump is easy to install and maintain. Aerator usage helps ponds and lakes by cycling the water from the bottom of the pond to the top. This water cycle adds oxygen to the water, reduces thermocline, and brings debris into suspension to allow filtration systems to remove it.
Aeration provides a long-term solution that lasts longer than seasonal chemical treatments. With aeration, there are no hazardous chemicals, electricity, or motors in the water. Aeration speeds up and helps the break down fish waste. During the hot summer months, aeration keeps the water moving to cycle oxygen to the bottom of your pond. This extra oxygen allows Koi and other fish to retreat to the deeper, cooler water. During the winter, OX-Gen Aerators maintain a hole in the ice to protect fish, boats, and docks. The opening in the ice allows natural gasses that are harmful to Koi and fish to escape.
The OX-Gen 4500 Air Pump has an overload sensor that prevents the pump from burning out and is oil-free, making them the perfect choice to create and sustain a healthy pond environment.
OX-Gen 4500 - 1.59 Cubic Feet per Minute, Subsurface Aeration Air Pump
High efficiency
Simple maintenance
Overload sensor prevents pump burnout
Engineered for 24-hour continuous use
Contains no oil
2-year warranty
Half Off Ponds OX-4500 - OX-Gen 1.59 CFM Diaphragm Aeration Pump for Ponds and Water Gardens
OX-Gen Air Pumps are the best option for healthy fishponds and water gardens. These aerators provide a year-round solution without dumping harmful chemicals into your water feature.
The OX-Gen Aerator cycles pond water, adds oxygen to the water feature, reduces thermocline, and brings debris into suspension allowing filtration systems to remove it.
Whisper quiet operation: reliable, oil-free, and extremely energy efficient
Optimal Depth: 1'-5' - Output: 1.59 CFM - Psi: 4.35 - Noise Rating (dBA): 32 - Volts: 120 - Watts: 25 - Frequency (Hz): 60 - Amps: 0.208
Indoor / Outdoor Use. 2-year warranty. Ships fast and free ground delivery
FAQs & Calculations to Help Select the Correct Kit
1. How Many Gallons of Water does My Water Feature Hold?
Rectangular Ponds
Length x Width x Average Depth x 7.48 = Gallons
Example: A rectangular pond 15’ long, 10’ wide and 1.5’ Deep Pond is...
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Oval Ponds
Length x Width x Average Depth x 0.8 x 7.48 = Gallons
Example: An oval pond 15’ long, 10’ wide and 1.5’ deep is...
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Round Ponds
Length x Width x Average Depth x 7.48 =Gallons
Example: 15’ long, 10’ wide and 1.5’ Deep Pond
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Streams
Length x Width x Average Depth x 0.25 x 7.48 = GALLONS =Gallons
Example: 15’ long, 10’ wide and 1.5’ Deep Pond
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
2. How Big of a Pump Do I Need??
Minimum pump size is determined by pond type, water volume, head height and friction loss. The minimum pump size recommendations are:
Water Garden, Few Small Goldfish
Circulate total pond water valoume every 2 hours.
Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
Fish Pond, Several Small Fish
Circulate total pond water valoume every 1 hour.
Example: 3,800 GPH pump for a 3000-gallon pond with 2’ waterfall.
Koi Pond, Several Large Fish
Circulate total pond water valoume every 3/4 hours.
Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
Calculating Head Height
Dynamic head pressure is found by taking the vertical height of your waterfall; the distance between where your pump is (typically in the skimmer) and where your waterfall is, and adding the static head pressure (pipe and fittings) 1’ for every 10’ of tubing and 1’ for every elbow or “T” fitting.
Example: 3' (vertical height) + 2.5 (25' of tubing) + 2' (for 2 elbows) = 7.5' of Dynamic Head Pressure
Note:
It is important to take into consideration while calculating how much flow will be at the top of your waterfall by accounting for the head height due to the laws of fluid dynamics. Please refer to the flow chart above to help choose the correct pump.
3. What Size Tubing Do I Need?
Tubing Size
Efficiency GPH
Minimum GPH
Maximum GPH
0.5”
< 300
60
420
0.75”
< 720
300
900
1”
< 1,200
700
1,500
1.25”
< 1,600
900
3,200
1.5”
< 2,600
2,000
4,400
2”
< 4,800
3,000
6,800
3”
< 9,000
6,000
14,000
4”
< 21,000
14,000
28,000
6”
< 42,000
33,000
60,000
About Half Off Ponds
Customer service is our business. We have been satisfying fish pond, water garden, and backyard waterfall enthusiasts for over 25 years! We're glad to assist you with your pond building project - from start, to finish!
Thanks for your business! We appreciate it!
- The Half Off Ponds Team