Audio-Technica ATW-1101/G New w/ Warranty

Description

THIS SALE IS FOR:
(1)
Audio-Technica ATW-1101/G
Condition:
-Brand New, Factory Sealed
Included:
-Full Factory Warranty
-Manufacturer's Included Accessories (if applicable)
-Live Tech Support by Phone or E-Mail
-FREE Shipping
PRODUCT INFO:
The Audio-Technica ATW-1101/G System 10 is a digital wireless solution for your electric guitar or bass rig that includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the AT-GcW guitar cable. The ATW-1101/G uses 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 GHz frequency range. Built for expandability, you can use up to eight systems simultaneously.
The ATW-1101/G is designed for quick and easy setup. Specifically for electric guitarists and bassists, it comes with the 36" AT-GcW guitar cable for connecting your guitar or bass to the ATW-T1001 UniPak pocket transmitter. Just plug the cable's 1/4" phone plug connector into your guitar, then plug the locking 4-pin connector on the other side into the pocket transmitter. Finally, just use a guitar cable to connect the unbalanced output on the ATW-R1100 digital receiver to your guitar amplifier's input and you are ready to go.
The ATW-1101/G wireless system is engineered to quickly find the best signal possible, utilizing an automatic frequency selection function that chooses open bands for you when you "pair" your transmitter with the receiver. Also designed to combat interference, the ATW-1101/G uses three different diversity techniques. Using frequency diversity, the system sends the wireless signal on two separate channels simultaneously and chooses the one with the clearest signal. It also transmits the signal across multiple intervals in time in order to fight multipath interference. This is known as time diversity. Furthermore, the system also makes use of space diversity, choosing between the receiver's dual antennas depending on which is picking up the best signal integrity.
Features:
Unbalanced 1/4" output on receiver for connecting to guitar amp
Balanced XLR output on receiver allows for connection to microphone level inputs on mixers
Level controls on transmitter and receiver
Pair indicator illuminates on receiver when synced with transmitter
AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping
Specifications:
Operating Frequencies
2.4 GHz ISM band
Dynamic Range
>109 dB (A-weighted), typical
Total Harmonic Distortion
<0.05% typical
Operating Range 30 m (100') typical
Operating Temperature Range
0 to +40° C (32 to 104° F)
Frequency Response
20 Hz to 20 kHz
Audio Sampling
24 bit, 48 kHz
Receiver
Receiving System
Diversity (frequency/time/space)
Output Connections
1x XLR, balanced
1x 1/4" (6.3 mm), unbalanced
Maximum Output Level
Balanced: 0 dBV
Unbalanced: +6 dBV
Power Supply
100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive, switched mode external power supply
Dimensions
7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm)
Weight
10.2 oz (290 g)
Transmitter
RF Output Power
10 mW
Spurious Emission
Following federal and national regulations
Input Connections
1x 4-pin locking connector
Wiring:
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Batteries
2x 1.5V AA (not included)
Battery Life
>7 hours (alkaline)
Dimensions
2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm)
Weight
3.5 oz (100 g), without batteries
Cable
Type
1/4" TS Phone to 4-pin Connector
Length
36" (0.9 m)
CONTACT US for more info, product videos, and product reviews.
ABOUT US:
-Fully Authorized Internet and Showroom Dealer
-All New Products Sold with Valid Factory Warranty
-Northern NJ Showrooms and Warehouse Pickups Available