-40%
Acura LS VTEC B18 B A VTEC Head CHIP B16 Type R GSR, P28 P72 JDM P08 P30 P91 LSV
€ 10.76
- Description
- Size Guide
Description
This auction is forswapped
B18B B18A LS / VTEC
DOHC Motor
in to
1992 to 2000 Civic, Del sol, Integra Using obd1 VTEC ECU P28 P72 P08 P30
FOR 1996 to 2000 civic integra you must use the step down harness and the chipped / Socketed obd1 ecu to use this chip
This is for the
Custom Tuned Fom MUGEN map for
B18 / VTEC
engine,
this chip Has the
power and torque throughout the entire 8400
RPM, This is good for drag / Circuit racing.
Chip
modifies the timing / Fuel curve to increase horsepower throughout the power band. Depending on your engine Setup, expect
9-20 horsepower
just from this chip
Custom Tuned Mugen
MAP FOR B18 / VTEC Chip Info
VTEC Enable:
4750 RPM IF YOU WANT THE
VTEC POINT
TO BE
HIGHER
OR
LOWER
, PLEASE DO LET ME KNOW WHEN YOU BUY THE CHIP
REV Limit: 8300 rpm IF YOU WANT THE
REV LIMIT
TO BE
HIGHER
OR
LOWER
, PLEASE DO LET ME KNOW WHEN YOU BUY THE CHIP
Idle: 850 rpm
Knock sensor: DISABLE / or Enable
speed limiter DISABLE
O2 : DISABLE / or Enable
Shift Light :
( if you want the shift light.
Must let me know which RPM you want it set at)
BONUS: LAUNCH CONTROL (OPTIONAL ) If you want the launch control please do leave a note when you buy the Chip
I can also disable, IAVC, , VTEC speed check , Oil pressure switch,
IF THE ECU IS NOT SOCKETED THEN PLEASE LOOK IN MY OTHER ITEM FOR SALE AND YOU WILL FIND THE CHIPPING KIT TO MODIFY THE OBD1 ECU,
IF YOU HAVE ANY QUESTION DONT HESITATE TO ASK
ill Email you the picture and Tracking # of the item once it's shipped
USA Shipping through USPS First Class, 3 to 6 Business days (With Tracking #)
International shipping Through USPS First class,
7 to 15
business days (with Tracking #)
Canadian shipping through Canada post,
3 to 6 Business days
I would recommend the ECU modification is done by a professional. I can't warranty chips damaged by static electricity, or improper installation.
I also modify ECU, If you would like to send me your ECU for modification, please email me for details.